AT&T TL7610 Quick Start Manual page 13

Getting started
MODE
LIFTER MODE
light
ON/OFF
LIFTER AUDIO ADJUST
Headset base installation
Adjust lifter audio
Press MODE on the headset base to change
.
the mode if the LIFTER MODE light is not on.
Make sure that the LIFTER MODE light on the
headset base is on.
2. Lift the corded handset from the telephone
cradle.
3. After you install and charge the battery (see
pages 4-5), put the headset next to your ear.
Press ON/
4.
dial tone.
5. If there is no dial tone or the dial tone is not
clear, slide the LIFTER AUDIO ADJUST on the
side of the headset base from A to G until the
dial tone is clear.
6. If the dial tone is not clear, repeat step 5 until
you find the clearest dial tone.
on the headset and listen for the
OFF
2