Installing Stand; Wall Mounting (Optional) - Sanyo FVM4612 Owner's Manual

Installing Stand

1. Place the LCD TV on a flat surface place
where maintained with soft materials (such
as a blanket) to protect the display screen.
2. Secure the stand-base to the LCD TV with
4 screws (M4x10) found in the accessory
bag.
WARNING:
• To prevent injury, this apparatus must be securely
attached to the floor/wall in accordance with the
installation instructions.
• This LCD TV could fall over if it is pushed, pulled or
knocked down. It would be safer to use a screw to
secure the LCD TV to desktop.
Screw type:
6
Wall Mounting
Before mounting the LCD TV on wall, remove
the 4 screws that were originally threaded into
the wall mounting inserts on the back of your
LCD TV.
• VESA standard interface: 400 x 400mm
• Screw type: M6x20
NOTE:
1. Wall mounting kit is not supplied.
2. Wall mounting kit shall be able to sustain at
least 3 times of set weight.
We suggest that you keep your LCD TV at least
2.36 inches (60 mm) away from the wall to
prevent cable interference and to make room
for a better heat dissipation.
IMPORTANT: Wall mount kit must
comply with VESA standard 400
x 400. All four (4) screws must be
threaded to the wall mount and
HDTV's back cabinet.
www.sanyoctv.com
Need help?
(Optional)
wall
60mm
1-800-877-5032