Usb Connection; Power Connection; Initial Setup - Sanyo FVM4612 Owner's Manual

USB Connection

Your LCD TV features a JPEG Photo Viewer
that allows watching digital still pictures from
your USB disk plugged to the USB slot at the
side panel.
1. Plug your USB disk to the USB slot at the
side panel.
2. Press the [INPUT] button to select [USB] as
the input signal (see page 17 for detail).

Power Connection

1. Plug in AC power cord (120V AC, 60Hz)
2. Press the [POWER] button, (Follow the on-
screen instructions).
12

Initial Setup

For the first time after powering on your LCD
TV, the Setup Wizard appears.
1. Select the language used for the OSD (On-
Screen-Display) Menu.
Setup Wizard (1/6)
Please select language
Move
2. Select either Home or Shop mode.
Setup Wizard (2/6)
Please select Home/Shop
Home mode default settings are recommended for
in-home use. ENERGY STAR
Shop mode is intended for in-store display and resets
video settings at Power On.
Previous
Move
If later you want to change the mode, you can
change it via the Home/Shop selection under
Energy Options on the Setup menu (See page
16).
NOTE:
• The Home mode is intended for home use,
and will save much energy.
• Any menu or control changes in the Shop mode will
not be saved when the LCD TV is turned off.
www.sanyoctv.com
Need help?
English
French
Spanish
Cancel
ENTER Select
Home Mode
Shop Mode
qualified.
®
Cancel
ENTER Select
1-800-877-5032