Sanyo FW65R70F Quick Start Manual

7 Parental Controls
Parental controls enable you to control whether the members of your household can view certain kinds of broadcast
TV programs. When a program or feature is blocked, you can unblock it by entering a parental control PIN that only
you know.
Note:
C
Parental controls block content from the TV tuner and from streaming options, if any, on the Home screen menu.
Parental controls do not block content on other TV inputs or content from streaming channels you add to your TV.
Creating a parental control PIN
To create a new parental control PIN, from the Home screen menu navigate to Settings > Parental controls. The
screen displays a numeric keypad. Use the purple directional pad to enter a four-digit code, and then press OK.
Then repeat the process to enter the same PIN again, just to make sure you correctly entered the PIN you want to
use.
C Important:
If you forget your parental control PIN, the only way to recover is to perform a factory reset operation.
Blocking broadcast TV programs
Enabling parental control of TV programs
The first step in blocking TV programs is to enable parental control of TV programs.
To enable parental control of TV programs:
1. In the Home screen menu, navigate to Settings > Parental controls, and then enter your parental control PIN.
2. In the Parental controls screen, navigate to TV tuner > Parental control of TV shows.
3. Make sure the check box next to Enable parental controls is checked. If not, highlight it and press OK.
Blocking based on US TV ratings
To block TV programs based on US television ratings:
1. From the Home screen menu, navigate to Settings > Parental controls, and then enter your parental control PIN.
2. In the Parental controls screen, navigate to TV tuner > TV ratings. Choose among the following settings:
x Entire ratings – Highlight the rating you want to block, and then navigate to the right and select the first option
that blocks the entire rating level (and all higher rating levels).
x Individual content types – Highlight the rating that contains the content type you want to block, and then
select the content types you want to block from among those listed. Remember that blocking a content type
in one rating blocks the equivalent content type in all higher rating levels.
Copyright
All other registered and unregistered trademarks are the property of their respective owners.
© 2021 Funai Electric Co., Ltd. All rights reserved.
The terms HDMI and HDMI High-Definition
No part of this owner's manual may be reproduced, transmitted,
Multimedia Interface, and the HDMI Logo
disseminated or transcribed,
are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc. in the in any form or for any purpose without the express prior written
United States and other countries. consent of Funai.
Furthermore, any unauthorized commercial distribution of this
Manufactured under license from Dolby
owner's manual or any revision hereto is strictly prohibited.
Laboratories. Dolby, Dolby Audio, and the
double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
Portions of this software are copyright © The FreeType Project
(www.freetype.org).
The American Academy of Pediatrics discourages television
viewing for children younger than two years of age.
8 Troubleshooting
Category Problem Tip
Power No power • Ensure that the AC outlet supplies the proper voltage.
Plug another electrical appliance into the AC outlet to
ensure that the AC outlet operates normally.
• If a power failure occurs, unplug the AC power cord for 1
minute to allow the unit to reset itself.
Remote Remote buttons are not • Re-insert or replace the AAA batteries with their polarities
functional. (+/–) as indicated on the remote battery area.
Network Cannot connect the • Check if your router and/or modem is properly connected.
network.
• Check if the Ethernet cable connection between the TV
and your router or modem is properly secured.
• Power cycle the router and/or modem.
• Check your network settings.
Slow Data Connection or • Check the settings between your router and ISP modem or
buffering. gateway (if applicable).
• Connect to a stable wireless connection from home
wireless or wired network.
• The use of mobile hot spots or public wireless connections
is not recommended.
Picture on HDMI Television has sound
• HDMI EDID Version setting is set to a different mode than
Input with no picture or your source device.
abnormal picture.
• Change the resolution output of your source device.
Sound on Television has no sound. • Please check to be sure the device is connected to the
HDMI with HDMI 2 (ARC) input on the TV.
external devices
Need help connecting this LED TV? Call Us at 1 866 212 0436
Model :
Serial :
FW65R70F
FW65R79FC
FW55R70F
FW50R71F
Product design is for illustrative purposes only.
Actual product may vary.
Quick start guide
If you have any questions or need a detailed manual, please visit our support website at
www.sanyo-av.com
Chat with us:
Scan to chat with us:
https://tinyurl.com/y3ykk54s
SANYO is a registered trademark of SANYO Electric Co., Ltd. and is used by Funai Electric Co.,
Ltd. and Funai Corporation, Inc. under license from SANYO Electric Co., Ltd.