Sony RM-VL700T Operating Instructions Manual page 22

Programming signals of another
remote control
— Learning Function (continued)
To erase the learned function
of the Component Select
button that is TV, VCR, CBL/SAT,
DVD or AMP
Example: To erase the function
"learned" by the TV button
While holding SET pressed for
over 3 seconds, press and hold
the Component Select button
you want to erase for a while.
The SET indicator turns off,
and the Selected Component
Select button lights up.
GB
22
x
To clear all function signals
"learned" for a specific
Component Select button
Example: To erase all functions
"learned" by the VCR button
1
Press and hold SET for over
3 seconds.
The SET indicator lights up,
and all Component Select
buttons flash.
2
While holding x pressed,
press the Component Select
button you want to erase.
The SET indicator turns off,
and the selected Component
Select button lights up.
during data
erasing
Note
With this operation, you can only
erase the "learned" functions of all
buttons for a specific component.
3
Press SET to finish setting.
To cancel erasing, press SET.
data erasing
complete