Sony RM-VL700T Operating Instructions Manual page 16

Programming signals of another
remote control
— Learning Function (continued)
3
Press the Component Select
button for the component
whose signals are to be
"learned."
Both the SET indicator and the
selected Component Select
button light up, and all other
buttons turn off.
GB
16
4
Press the button on the
Commander you want to
"teach."
Both the SET indicator and the
selected Component Select
button flash (Learning function
standby).
If another signal has already
been "learned" by that
button
The SET indicator flashes
twice, and the Commander
takes no action returning to its
state after the Component
Select button was pressed in
Step 3.
Either "teach" to another free
button, or clear the already
"learned" function (page 21)
and start over from the
beginning.