To Control The Volume - Sony RM-VL700T Operating Instructions Manual

2
Press any Player Control
button.
See "Table of Preset Functions"
(page 35) for the functions of
buttons for each component.
Note
The remote control signals may be
different for some components or
functions. In this case, programme the
remote control signals with the
Learning function (see page 15). Note,
however, that components and
functions that do not support the
remote control of infrared signals will
not work with this Commander.

To control the volume

Press 2 +/– to control the
volume. Press % to mute the
sound. When you select a visual
component, the TV's volume will
be controlled (TV lights up), and
when you select an audio
component, the amplifier's
volume will be controlled (AMP
lights up). You can change this
setting also (page 24).
Notes
• If you used the Learning function
(page 15) to programme the 2 +/–
or % buttons to send a signal to any
other component, that signal will be
transmitted instead of the volume or
muting of the TV or amplifier when
you select that component.
• If you used the Learning function
(page 15) to programme the 2 +/–
or % buttons for the TV or AMP to
send a signal to any other
Component, that signal will be
transmitted only when you select TV
or AMP. When you select another
component, the preset volume control
signals for TV or AMP will be
transmitted.
• If you have assigned another
component to the TV or AMP buttons
(page 27), the volume of the TV or
amplifier cannot be controlled even if
you select another component.
Continued
GB
13