Specifications; Before Assembly - Schwinn a40 Owner's Manual

Maximum User Weight:
Power Requirements:
Regulatory Approvals:
Optional AC Power Adapter: UL listed, CSA certified (or equivalent),
Rated 120V60Hz Input, 9VDC, 0.5 A Output. Class 2 or LPS.
This product, its packaging, and components contain chemicals
known to the State of California to cause cancer, birth defects, or
reproductive harm. This Notice is provided in accordance with
California's Proposition 65. If you would like additional information,
please refer to our website at www.nautilus.com/prop65.

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Allow a workout area of a minimum 72" x 107" (183 cm x 272 cm). Be sure that the workout space
you are utilizing has adequate height clearance, taking into consideration the height of the user and the elliptical machine.
Basic Assembly Tips
Follow these basic points when you assemble your machine:
1. Read and understand the "Important Safety Instructions" before assembly.
2. Collect all the pieces necessary for each assembly step.
3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counter-
clockwise) to loosen, unless instructed otherwise.
4. When attaching 2 pieces, gently lift and look through the bolt holes to help insert the bolt through the holes.
5. The assembly requires 2 people.
Note: Some axles contain oil. Use caution to avoid staining clothes or carpet.
275 lbs. (125 kg)
4 D Batteries (LR20) – not included
Operational Voltage: 6VDC

SpECIFICATIONS

56" (142 cm)
64.5" (164 cm)
23.7" (60 cm)
5