Replacing The Console Batteries - Schwinn a40 Owner's Manual

Replacing the Console Batteries

If the Battery Indicator comes on, replace the batteries in the back of the console with fresh batteries. Make sure the
batteries point in the +/– direction shown in the battery bay.
Note: The console uses D size batteries (LR20). If you use rechargeable batteries, the optional power adapter will not
recharge the batteries.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc) batteries.
Machine Type Switch
The Machine Type switch (N) on the Console is preset at the factory to B (bike) or E (elliptical). If you replace the console,
it will possibly be necessary to set the switch for your machine. After you set the switch, it is necessary to turn the power
off and then turn it back on to start the new mode of operation.
NOTICE: Make sure that the Machine Type is set correctly to give more accurate calculations for Distance, Speed
and Calories values.
26
N
X4
+
–