Parent Unit Power Supply - Motorola MBP30 User Manual

2.3

Parent unit power supply

IMPORTANT
We recommend the rechargeable battery pack to be installed before use,
so that the unit continues to work in the event of a mains power failure.
1. Connect the small plug of the power adaptor to the parent unit and
the other end to the electrical outlet (110V/60Hz)
NOTE
Only use the enclosed power adaptor (5V DC / 1000mA).
2. The LCD screen illuminates and starts up automatically after a few
seconds.
3. Press and hold
NOTE
Once the baby and parent units are switched on, the display on the
parent unit will show the video captured by the baby unit.
When there is no connection or out of range, the
display will flash and the parent unit will beep continuously. Move the
parent unit closer to the baby unit until the link is re-established.
Getting started
F
to switch OFF the parent unit.
icon on the LCD
9