Main Nas Starter Utility Screen - ZyXEL Communications NSA320 User Manual

2.4 Main NAS Starter Utility Screen

The main NAS Starter Utility screen displays after you select a NSA in the NSA
Discovery screen.
NAS Starter Utility
Figure 5
The following table describes the labels in this screen.
NAS Starter Utility
Table 3
LABEL
Discovery
bar
Name
Firmware
IP address
Status
NAS Discovery
Import files or
folders with
zPilot
Add a network
drive to My
Computer
Manage the
device
NSA320 User's Guide
Main Screen
Main Screen
DESCRIPTION
Click this to use the NSA Discovery screen
find and select the NSA on your network to which you want to connect.
The bar shows the NSA's in-use and remaining storage capacity.
This is the server name you configured for the NSA. If you have more
than one NSA in your network, it is recommended that you give each
one a unique name for identification purposes.
This shows the version of firmware the NSA is currently using.
This is the current IP address of the NSA.
This shows whether the NSA is Online, Unreachable, Configuring,
or Config Failed.
Click this to use the NSA Discovery screen
find and select the NSA on your network to which you want to connect.
Click this to launch zPilot to drag and drop files onto the NSA.
Click this to add the NSA as a network drive in your computer's
Windows Explorer.
Click this to log into the advanced administration screens. See
3.5 on page 66 for details on the administration screens.
Chapter 2 NAS Starter Utility
(Section 2.3 on page 29) to
(Section 2.3 on page 29) to
Section
31