ZyXEL Communications NSA320 User Manual page 374

Chapter 18 Product Specifications
Table 117 Physical Features (continued)
Power Button
COPY/SYNC Button
RESET Button
374
Press the Power button for one second to turn it on.
Turn off the NSA before unplugging it.
Press the Power button for 3 seconds until you hear
one beep, then release it. The NSA goes starts to
shutdown its software and turns off.
Press the Power button for 5 seconds until you hear
two beeps, then release it. The NSA turns off
immediately.
The COPY/SYNC button is used to copy or sync data from
the NSA to a compatible external (USB) storage device or
from the external (USB) storage device to the NSA.
Press the COPY/SYNC button to copy data from Public
folder (default) of the NSA. Use the Web Configurator to
configure the folder locations for the COPY/SYNC function.
During the data transfer, the COPY LED blinks and stops
when the transfer is complete.
If you want to sync the data in the NSA with the external
(USB) storage device, press the COPY/SYNC button until
you hear one beep.
If the COPY LED turns red, an error has occurred and the
transfer is stopped. Press the COPY/SYNC button once and
the COPY LED turns green.
Press the RESET button until you hear one beep then
release it to reset the NSA's IP address and password to the
default values.
Press the RESET button until you hear two beeps. After the
second beep, continue pressing the button for five more
seconds, then release it. You will hear three quick beeps
after you release the button. This resets the NSA to the
factory default configuration. All settings you have
configured on the NSA, including IP address, password, user
accounts, groups, and so on will be reset to the factory
defaults.
The reset process does NOT affect the volume settings, nor
data stored on the NSA.
NSA320 User's Guide