ZyXEL Communications NSA320 User Manual page 266

Chapter 10 Package Management
The following table describes the labels in this screen.
Table 69 Protect > Backup: Step 2
LABEL
Backup Source
Selected Source
Folders
Backup Target
266
DESCRIPTION
Select an (internal) volume and the folders and files to back up using
this tree interface.
Click to browse through folders, sub-folders and files.
Click to close a folder in the tree. This is useful if there are many
folders or files that you wish to hide from view.
Click to select a folder or file to back up. This also selects all sub-
folders and files.
Click to deselect the folder or file. This also deselects all sub-
folders and files.
and appear when there are too many folders/files to
display. Click the arrows to scroll up or down through the folders/
files.
for a folder means all sub-folders and files and new folders/files
added later will be backed up.
for a file means the file will be backed up.
(a grayed out check box) for a folder means that only some sub-
folders and files under the folder will be backed up. Newly added
folders/files will NOT be backed up.
means the file structure is still loading. Please wait for the folders/
files to display.
Note: If you select to back up an entire folder
select a sub-folder or file within that folder, the main folder
icon will turn and any new sub-folders and files added to
this main folder after the initial backup configuration will
NOT be backed up.
A list of your select folders and files displays below the selection
fields.
This shows the path of the backup source folder you selected.
Select the target folder where you want to place your backup.
and then de-
NSA320 User's Guide