Restore: Step 3 - ZyXEL Communications NSA320 User Manual

The following table describes the labels in this screen.
Table 78 Protect > Restore: Step 2
LABEL
Step 2. Select
Restore Point
Job Name
Restored Time
Previous
Next

10.11.3 Restore: Step 3

Use this screen to select the folder where the archive you want to restore is
located.
Figure 152 Protect > Restore: Step 3
NSA320 User's Guide
DESCRIPTION
If you selected Remote NSA for the backup you want to restore, you
can see a list of all the backups you performed in the Job Name
table.
If you selected Internal or External Volume for the backup you
want to restore, you can see a list of restore times for the backups
you performed in the Restored Time table.
Select a previous backup job in the list that you want to restore to
your NSA. Once you choose a job name, all available restore times for
that backup job shows in the Restored Time table.
Select a previous backup job in the list that you want to restore to
your NSA.
Click this to go back to the previous screen.
Click this to go to the next screen.
Chapter 10 Package Management
279