Main Nas Starter Utility Screen - ZyXEL Communications NSA 210 User Manual

Chapter 2 NAS Starter Utility
The following table describes the labels in this screen.
Table 2 NAS Discovery
LABEL
Refresh
Hostname

2.4 Main NAS Starter Utility Screen

The main NAS Starter Utility screen displays after you select a NSA in the NSA
Discovery screen. Run the Initialization Wizard is the only link that appears if
you have not yet initialized the hard disk.
Figure 7
32
DESCRIPTION
Click this to refresh the screen. The NAS Starter Utility does not
automatically refresh.
This is the server name you configured for the NSA. If you have more
than one NSA in your network, it is recommended that you give each
one a unique name for identification purposes.
If you have several NSAs connected to your computer/network, hover
your mouse over the host name to view the details of each device. A
box pops up containing details about the NSA.
Hostname shows the NSA's configured server name.
IP shows the NSA's current IP address.
MAC Address shows the NSA's unique physical hardware address
(MAC).
Model ID shows the NSA's model name.
Firmware Version shows the version of firmware the NSA is currently
using.
Status shows whether the NSA is Online, Unreachable,
Configuring, or Config Failed.
NAS Starter Utility
Main Screen
NSA210 User's Guide