Assembly Instructions - Stamina inLine Inversion System Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail
us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the U.S.). Our
Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Insert the REAR FRAME(1) into the brackets on the FRONT FRAME(2) and secure with BUTTON
HEAD BOLTS(M8x1.25x15mm)(39), ARC WASHERS(M8)(47), and WASHERS(M8)(44).
STEP 2
Insert the HANDRAILS(12) into both sides of the FRONT FRAME(2) and secure with BUTTON HEAD
BOLTS(M6x1x15mm)(40) and ARC WASHERS(M6)(45).
7