Westerbeke 10TWO Operator's Manual page 28

Marine engine and generator set

Hide thumbs Also See for 10TWO:

Table of Contents

STARTING PROCEDURES

Instrument panel, description and use of:

Note 1:

When generator

is stopped after use,

the water temperature

and oil pressure gauges may stay at their running readings.

Note 2:

When generator

is next to be used,

depress preheat switch.

The temperature and pressure gauges will "ZERO" and the volt-

meter will register battery voltage.

The electric fuel pump,

mounted on the engine, will also begin to operate,

purging

any air accumulated in the system.

Note 3:

The generator

is now prepared for

starting.

for specific instructions.

See next page

Table of Contents

3kw