Table of Contents
Advertisement
The total system is very reliable and requires only a daily check
of the water level in the system plus routine check of hose clamps
and fittings.
It
is likely that
zinc electrodes will waste away from contact
with
sea
water.
It
is
also
possible
for
the
raw
water
pump
impeller to fail due to lack of sea water or deter ioration..
An
early sign of impeller failure is less water and more steam at the
exhaust through hull fitting.
It is recommended,
therefore,
that zinc electrodes #11885, water
pump belt #32942, alternator belt #13585, sea water pump assembly
#32617 and sea water impeller kit #32620 be carried onboard at all
times..
These parts should be ordered from your nearest stocking
dealer and used as inspection dictates ..
17
Advertisement
Table of Contents
