Torquing Cylinder Head Bolts
Tighten the cylinder head bolts according to the sequence shown in the illustration below. Make sure the
engine is cold when this is done. Loosen one head bold one-half turn and then tighten It to the specified
torque. Then proceed to the next head bolt in the sequence numbering shown.
BeG 4.8KW TIGHTENING SEQUENCE
8(G Ii.SlW TIGMTEKIKG SEQUENCE
Torque Specifications:
BCG 4.0KW
28.9 - 36.2 Ib-ft (4.0 - 5.0 kg-m)
BCG 6.5KW
36.2 - 43.4 Ib-ft (5.0 - 6.0 kg-m)
77
Westerbeke Generators