Westerbeke BCG4.0KW Operator's Manual page 43

The engine-mounted electric lift pump contains
the second fuel filter screen. This pump supplies
fuel to the engine's carburetor during engine
operation. A cleanable filter screen is contained
in the pump's base.
Remove the base by placing a wrench on the hex
nut and twisting it loose from the bayonet fittings.
Clean the screen as needed.
A
new base gasket
must
be installed each time the pump base is
removed and reinstalled. Make sure a good seal
Filter Screen
exists when replacing the base cover.
~~~::-t--Magnet
sealing Gasket
BOiseCo'ler
~WARNINGI
Shut off the fuel service valve althe engine when servicing the fuel system. Take care in catch-
ing any fuel thai may spill from within the pump when the base is removed. DO NOT allow
any smoking, open flames, or other sources of fire near the fuel system when servicing. Make
sure proper ventilation exists when servicing the fuel system.
Westerbeke Generators
40