Replacing The Exp I/O Pc Board; Replacing The Centro Pc Board - TEC B-880 series User Manual

2. MAJOR UNIT REPLACEMENT EO18-33007

2.11 REPLACING THE EXP I/O PC BOARD

2.11 REPLACING THE EXP I/O PC BOARD
(1) Remove the two SM-3x6 screws to detach the EXP I/O PC board from the rear cover.
(2) Disconnect the harness from CN1 on the EXP I/O PC board.
EXP I/O PC Board
CN1
SM-3x6 Screw
Harness
Fig. 2-22
(3) Replace the EXP I/O PC board with a new one, then reassemble in the reverse order of removal.

2.12 REPLACING THE CENTRO PC BOARD

(1) Refer to Section 2.11 to detach the EXP I/O PC board.
(2) Remove the two SM-3x6C screws to detach the CENTRO PC board from the rear cover.
(3) Disconnect the harness from CN1 on the CENTRO PC board.
CENTRO PC Board
SM-3x6C Screw
CN1
Harness
Fig. 2-23
(4) Replace the CENTRO PC board with a new one, then reassemble in the reverse order of removal.
2-14