Installation Procedure; Connecting The Power Cord And Cables; Holder Stand Installation - TEC B-880 series User Manual

6. INSTALLATION PROCEDURE

6. INSTALLATION PROCEDURE

6.1 CONNECTING THE POWER CORD AND CABLES

Turn the POWER SWITCH to OFF before connecting the power cord or cables.
4
1
3
NOTE: Different cables cannot be used at the same time.

6.2 HOLDER STAND INSTALLATION

Fit the left and right side holders into the dowels of the holder base and fasten the side holders to the
holder base with the thumbscrews.
Left Side Holder
Holder Base
[B-872]
2
Dowel
6.1 CONNECTING THE POWER CORD AND CABLES
WARNING!
1
2
3
1 Power Cord
2 Serial I/F Cable (RS-232C)
3 Parallel I/F Cable (Centronics)
4 Expansion I/O Cable
Thumbscrew
6-1
[B-882]
4
Fig. 6-1
Right Side Holder
Fig. 6-2
EO1-33017