Exp I/O Pc Board (B-8700-Io-Qm) - TEC B-480 SERIES Maintenance Manual

3. INSTALLATION PROCEDURE FOR THE OPTIONAL EQUIPMENT

3.2 EXP I/O PC Board (B-8700-IO-QM)

All the following parts are supplied with the kit. Make sure you have all items shown below.
EXP I/O PC Board (1 pc.)
1. Refer to Section 2 and remove the top cover and left side cover.
2. Remove the two FL-3x4 screws to detach the blind plate.
FL-3X4 Screw
NOTE: Keep the FL-3x4 screws and blind plate safe.
3. Remove the two SM-3x6 screws from the EXP I/O PC board.
SM-3x6 Screw
Harness (1 pc.)
3-4
EO18-33004
(Revision Date: Jan. 28, 2000)
3.2 EXP I/O PC Board (B-8700-IO-QM)
Fig. 3-6
Blind Plate
Fig. 3-7
EXP I/O PC Board
Fig. 3-8