Hitachi CP-X205 User's Manual And Operating Manual page 99

Projector Management using SNMP
The SNMP (Simple Network Management Protocol) enables to manage the
projector information, which is a failure or warning status, from the computer on
the network. The SNMP management software will be required on the computer
to use this function.
NOTE • It is recommended that SNMP functions be carried out by a network
administrator.
• SNMP management software must be installed on the computer to monitor
the projector via SNMP.
Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter "http://192.168.1.10/" into the address bar of the web browser.
[Port Settings] on the main menu.
4) Click the [Enable] check box to open the SNMP Port.
Set the IP address to send the SNMP trap to when a Failure/Warning occurs.
NOTE
settings have been changed. Click [Network Restart]
following items.
[Security Settings] on the main menu.
[SNMP] and set the Community Name on the screen that is displayed.
NOTE
changed. Click [Network Restart]
[Alert Settings] on the main menu and select the Failure/Warning item to be
8) Click the [Enable] check box to send out the SNMP trap for Failures/Warnings.
Clear the [Enable] check box when SNMP trap transmission is not required.
[Apply] button to save the settings.
[Logon].
SNMP Port
Community Name has been