Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter "http://192.168.1.10/" into the address bar of the web browser.
2) Click [Date/Time Settings]
Refer to the Date/Time Settings item in
Projector via a Web Browser" for further information.
[Apply] button to save the settings.
NOTE
SNTP
• The battery for the built in clock may be dead if the clock loses time even
when the date and time have been set correctly. Replace the battery by
following the instructions on replacing the battery.
(
"Internal clock battery" section of the User's Manual - Operating Guide)
•
to maintain accurate time.
28
[Logon].
Daylight Savings Time or