e-SHOT (Still Image Transfer) Settings (Continued)
When the authentication setting is enabled, the following settings are required.
[Security Settings] on the main menu.
7) Select [Network Control] and enter the desired authentication password.
8) Click the [Apply] button to save the settings.
NOTE
Port (Port: 9716).
the network connection. You can restart the network connection by clicking
[Network Restart] on the main menu.
instructions.
(
"NETWORK menu" section of the User's Manual - Operating Guide).
NOTE
browser. Refer to "Event Scheduling" (
,
, and Image Transfer
26) in detail.
Network Control