Item
Network Control Port1
Port open
Authentication
Network Control Port2
Port open
Authentication
Image Transfer Port
Port open
Authentication
SNMP Port
Port open
Trap address
SMTP Port
Port open
Click the [Apply] button to save the settings.
NOTE
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
Click the [Enable]
Click the [Enable] check box when authentication is required
for this port.
Click the [Enable]
Click the [Enable] check box when authentication is required
for this port.
Click the [Enable]
Click the [Enable] check box when authentication is required
for this port.
Click the [Enable] check box to use SNMP.
Click the [Enable]
Description