Item
Send mail
SMTP Server IP Address
Sender E-mail address
Recipient E-mail address
Click the [Apply] button to save the settings.
NOTE
[Send Test Mail] button. Please enable Send mail setting before clicking [Send
Test Mail].
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
Click the [Enable]
Settings.
• The address allows not only IP address but also domain
Settings. The maximum length of host or domain name is up
alphanumeric characters.
can also specify [TO] or [CC] for each address. The length of
characters.
Description
Alert
Network