Hitachi CP-X205 User's Manual And Operating Manual page 101

Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter "http://192.168.1.10/" into the address bar of the web browser.
[Schedule Settings] on the main menu and select the required schedule
item. For example, if you want to perform the command every Sunday, please
select the [Sunday].
4) Click the [Enable] check box to enable scheduling.
[Apply] button to save the settings.
7) Click [Add]
parameters, click [Register] to add the new event. To return the previous
page, click [Cancel] button.
8) Click the [Delete] button when you want to delete a schedule.
There are three types of scheduling.
NOTE
seconds when at least 1 "Power ON" schedule is saved.
• When the schedule function is used, the power cord must be connected to
the projector and the outlet and the power switch must be turned on, [ | ]. The
schedule function does not work when the power switch is turned off, [
the breaker in a room is tripped. The POWER indicator will lights orange or
green when the projector is receiving the power.
[Logon].
] or
27