Software Installation; Windows Vista (32-/64-Bit) - SIIG USB SoundWave 7.1 Digital Quick Installation Manual

Software Installation

Windows 7, Vista, XP, and Server 2003 will automatically
install it's built-in driver for the USB SoundWave 7.1 Digital
when connected. To get the full feature from the USB
SoundWave 7.1 Digital, install the driver from the included
software CD using the directions below. Important: Plug
in the USB SoundWave 7.1 Digital and allow the Windows
driver to load before inserting the software CD.
Windows 7 (32-/64-bit)
1. Plug the USB SoundWave 7.1 Digital into an available
USB port.
2. Insert the software CD.
At the CD AutoPlay box: Click Open folder to view
files. Double click Setup.
If AutoPlay doesn't start: Click Start, in the Search
programs and files box, type D:\setup.exe, then
press Enter. (Change D: to match your CD/DVD-
ROM drive letter)
3. Follow the on-screen instructions to complete the
installation.

Windows Vista (32-/64-bit)

1. Plug the USB SoundWave 7.1 Digital into an available
USB port.
5