Table of Contents
Advertisement
2-9
Onboard Indicators
LAN1/LAN2 LEDs
The Ethernet ports (located beside the VGA
port) have two LEDs. On each Gb LAN port,
one LED blinks to indicate activity while the
other may be green, amber or off to indicate
the speed of the connection. See the table
on the right for the functions associated with
the connection speed LED.
Dedicated IPMI LAN LEDs
(H8DCL-6/iF only)
A dedicated IPMI LAN is also included on the
H8DCL-i/6F serverboard. The amber LED on
the right indicates activity, while the green
LED on the left indicates the speed of the
connection. See the table at right for more
information.
BMC Heartbeat LED
A BMC (Baseboard Management Control)
Heartbeat LED is located at DP1 on the
motherboard. When DP1 is on, the BMC
Controller functions normally. See the tables
at right for more information.
Power LED
DP2 is an Onboard Power LED. When
this LED is lit, it means power is present
on the serverboard. Be sure to turn off the
system and unplug the power cord(s) before
removing or installing components.
UID LED (LE1)
A rear UID LED Indicator, located at LE1,
works in conjunction with the rear UID switch
to provide easy identifi cation for a unit that
might be in need of service. Refer to Page
2-9 for further UID details.
(Connection Speed
LED Color
Off
Green
Amber
IPMI LAN Link LED
(Left) & Activity LED (Right)
Color
Link
(Left)
Activity
(Right)
BMC Heartbeat (DP1))
Color
Status
Green
Off
State
On
Off
2-19
Chapter 2: Installation
LAN LED
Indicator)
Defi nition
10 MHz
100 MHz
1 GHz
Status
Defi nition
Green:
100 Mb/s
Solid
Amber:
Active
Blinking
LED Settings
Defi nition
Blinking
BMC: Normal
Off
Not functioning
normally
Power LED
(DP2)
System Status
Standby power present
on motherboard
No power connected
Advertisement
Table of Contents
