Main Switch Override Mechanism; Wake-On-Lan (Wol); Power Supply; Super I/O - Supero H8DCL-i User Manual

Serverboard
Hide thumbs Also See for H8DCL-i:
Table of Contents

Advertisement

H8DCL-i/6(F) Serverboard User's Manual

Main Switch Override Mechanism

The power button can function as a system suspend button. When the user
depresses the power button, the system will enter a SoftOff state. The monitor
will be suspended and the hard drive will spin down. Depressing the power button
again will cause the whole system to wake-up. During the SoftOff state, the power
supply provides power to keep the required circuitry in the system alive. In case the
system malfunctions and you want to turn off the power, just depress and hold the
power button for 4 seconds. The power will turn off and no power will be provided
to the motherboard.

Wake-On-LAN (WOL)

Wake-On-LAN is defi ned as the ability of a management application to remotely
power up a computer that is powered off. Remote PC setup, up-dates and access
tracking can occur after hours and on weekends so that daily LAN traffi c is kept to a
minimum and users are not interrupted. Wake-On-LAN must be enabled in BIOS.
1-6

Power Supply

As with all computer products, a stable power source is necessary for proper and
reliable operation. It is even more important for processors that have high CPU
clock rates.
The H8DCL-i/6(F) serverboard requires the use of proprietary power supplies.
Please refer to the pinout information for the power connectors in Section 7 of
Chapter 2 for detailed information on power requirements.
In areas where noisy power transmission is present, you may choose to install a
line fi lter to shield the computer from noise. It is recommended that you also install
a power surge protector to help avoid problems caused by power surges.
Warning: To prevent the possibility of explosion, do not use the wrong type of
onboard CMOS battery or install it upside down.
1-7

Super I/O

The disk drive adapter functions of the Super I/O Winbond® BMC chip includes a
data separator, write pre-compensation circuitry, decode logic, data rate selection,
a clock generator, drive interface control logic and interrupt and DMA logic. The
wide range of functions integrated onto the Super I/O greatly reduces the number
of components required for interfacing with fl oppy disk drives.
1-12

Advertisement

Table of Contents
loading

This manual is also suitable for:

H8dcl-6H8dcl-ifH8dcl-6f

Table of Contents