Oce TDS400 User Manual page 115

the Abort, Delete, Resume and Hold buttons. The service operator mode is
meant for Océ technicians.
In the Queue Manager and the System Control Panel, the repro operator,
Note:
the key operator and the system administrator have the same user rights. In the
Settings Editor, however, the user modes offer different rights.
The access to the key operator, repro operator, system administrator
Access
modes and service operator is password protected to allow only authorized
personnel to use particular functions. You can enter these modes by selecting
the Login option from the File menu and by specifying the correct password
when prompted for it, (see 'Log in' on page 128).
From the 'File' menu, select 'Close' to exit the Queue Manager.
The priority of print and copy jobs in the Queue Manager is
Job priority
determined by the order in which they are submitted to the Océ TDS400.
However, there is a setting in the Settings Editor which allows you to give copy
jobs priority over print jobs.
Océ Power Logic®: Queue Manager 115