Layout: Side/Rear Of The Receiver - Swann ADW-340 Instruction Manual

Layout: Side/Rear of the Receiver

Micro SD Card Slot
USB Port
Reset Button
A/V Out
Power Socket
Power button: When off, press and hold for three seconds to turn on. To turn the Receiver off,
press and hold for three seconds (note that while the Receiver is off, no recording is possible).
Power Socket: For connecting the included 5V power adapter.
MicroSD Card Slot: Insert a standard MicroSD card (up to 32GB) into this slot to store footage.
USB Port: The USB port is for production programming and does not have any function.
Antenna: The antenna can be folded down into the back of the screen (and this is how it will
be when you get it), flip it up to get the best signal.
Stand: If you want to put the receiver on a table, shelf or other flat surface but have it at a
useful angle, the flip out stand on the back has you covered.
Speakers: The built-in stereo speakers are located on the rear. They're louder than their size
may indicate (in this picture one speaker is hidden behind the stand).
A/V Out: If the LCD isn't enough for your needs, you can connect the A/V cable to the video
inputs on a television or other display device. A/V inputs are often marked as such, and some-
times called Video In, Composite Video, AUX, CH0 or similar.
Reset Button: Using a small pin or similar, press here to reset all settings to factory default.
Power Button
Speakers
Antenna
Stand
5