Swann ADW-340 Instruction Manual page 15

Menu: Record Setup (continued)
• If the card is new, ensure you format it immediately. Although most cards come
pre-formatted, they may use an incompatible file system and won't be suitable
until formatted.
To initiate the format, highlight Format Storage, then press the Menu button. A
•
confirmation screen will appear - press the Menu button again to confirm.
Setup Masking Area: You can choose to hide parts of the camera's view behind a
mask to stop motion being detected in that section of the screen. This is a good
idea if for example, you're monitoring your front yard and a tree swaying in the wind
keeps triggering motion events. Press Menu to select Setup Masking Area - this will
take you to the mask adjustment screen. Use the arrows to highlight a camera and
press Menu to select it and go to the mask adjustment screen.
Use the Arrow Buttons to navigate between squares, and the Menu button to
•
toggle the mask on and off in that square. Squares shaded in light blue will not
be checked for motion, any movement in that part of the picture will be ignored
and will not trigger recording.
Press ESC to exit the mask adjustment screen.
•
15