NVIDIA Quadro G-Sync II User Guide
Confi guring Frame Sync Using the
nvidia-settings Command Line
You can also confi gure frame lock using the
command line. This method is useful in a scripted
settings
environment for automating the setup process.
General Steps
1. Disable frame lock on all Quadros.
2. Make sure all display devices that are to be frame-
locked have the same refresh rate.
3. Confi gure which Quadro/display device is to be the master.
4. Confi gure the house sync (if applicable).
5. Confi gure the slave display devices.
6. Enable frame lock on the master Quadro.
7. Enable frame lock on the slave Quadros.
8. Test the hardware connections using the
test signal on the master Quadro.
Sample Confi gurations
Use the examples in this section as a guideline. The exact scripts
that you use will depend on your hardware confi guration.
For a full list of the nvidia-settings frame lock
attributes, see the
43
(1) main page.
nvidia-settings
nvidia-