Changing The Timing Signal Frequency - Nvidia QUADRO G-SYNC II User Manual

then under Select displays to be active clients, select the
check boxes for any displays that you want to be clients.
4. Click Apply.The following sections provide information
on other tasks. You can also consult the online help by
pressing F1 to open the Help fi le and then opening the
Workstation->Frame Synchronization contents.

Changing the Timing Signal Frequency

Follow these instructions if you are using the server to generate the
timing signals and you want to change the timing signal frequency.
1. From the NVIDIA Control
Panel Select a Task pane, under
the Workstation heading,
click Synchronize displays.
2. Make sure that the On this
system radio button under
The timing server is selected.
3. Click Edit Settings to open
the Server Settings dialog box.
4. Under The synchronization
pulses are based
on, click the Internal
timing signal with
a refresh rate of radio button.
5. Click the list arrow and select a refresh rate, then click OK.
The refresh rate of the server display as well as the frequency
of the timing signal will change based on your selection.
NVIDIA Frame Synchronization Under Windows
19