Table of Contents
Advertisement
Hardware Installation
Installation Procedures
The manufacturer assumes no liability for any damage,
caused directly or indirectly, by improper installation of any
components by unauthorized service personnel. If you do not
feel comfortable performing the installation, consult with a
qualified computer technician
Steps:
1.
Turn OFF all powers to your system, including any
peripherals (printer, external drives, modem, etc.).
2.
Disconnect the power cord and the monitor cable from the
back of the computer.
3.
Unfasten the cover mounting screws on your system and
remove the system cover. Refer to your system user
manual for instructions to determine the location of the
mounting screws.
4.
Remove the retaining screw that holds the slot cover in
place. Slide the slot cover out and put the screw aside
(you will need it to secure the adapter).
5.
To install the adapter in AGP expansion slot, carefully line
up the gold-fingered edge connector on the adapter directly
above the expansion slot connector on the motherboard.
Then press the adapter into place, completely. Use the
!! WARNING !!
Discharge static electricity by
touching the GROUND such as
metal part of your case
connected with good power
ground before you handle the
electronic circuit boards.
.
11
Advertisement
Table of Contents
