Nvidia QUADRO G-SYNC II User Manual page 49

NVIDIA Quadro G-Sync II User Guide
Examples:
0x00000001 - CRT-0
0x00000002 - CRT-1
0x00000003 - CRT-0 and CRT-1
0x00000100 - TV-0
0x00000200 - TV-1
0x00020000 - DFP-1
0x00010101 - CRT-0, TV-0 and DFP-0
0x000000FF - All CRTs
0x0000FF00 - All TVs
0x00FF0000 - All DFPs
Note:
You can use the command:
nvidia-settings -q [gpu:0]/EnabledDisplays
to see all the available displays on a given Quadro.
5. Enable use of the house sync signal.
nvidia-settings -a [framelock:0]/
FrameLockUseHouseSync=1
6. Confi gure the house sync signal video mode
nvidia-settings -a [framelock:0]/FrameLockVideoMode=0
7. Set the slave display device to none.
This is to avoid having unwanted display
devices locked to the sync signal.
nvidia-settings -a [gpu:0]/FrameLockSlaves=0x00000000
nvidia-settings -q [gpu:0]/FrameLockSlaves
8. Enable framelocking.
nvidia-settings -a [gpu:0]/FrameLockEnable=1
9. Toggle the test signal.
nvidia-settings -a [gpu:0]/FrameLockTestSignal=1
nvidia-settings -a [gpu:0]/FrameLockTestSignal=0
45