Event Setting - Vivotek FD8137H User Manual

7.23 Event setting

Group: event_i<0~2>
PARAMETER
name
enable
priority
delay
trigger
triggerstatus
di
vi
tampering
VALUE Default
string[40] NULL
0, 1 0
0, 1, 2 1
1~999 10
boot, boot
di,
motion,
seq,
recnotify,
tampering,
vi
String[40] triggerstatus
0, 1 1
0~7 0
0 ~ 255 0
URL Command Document for All Series
SECURITY DESCRIPTION
(get/set)
6/6 Identification of this entry.
6/6 Enable or disable this event.
6/6 Indicate the priority of this event:
"0" = low priority
"1" = normal priority
"2" = high priority
6/6 Delay in seconds before detecting the
next event.
6/6 Indicate the trigger condition:
"boot" = System boot
"di"= Digital input
"motion" = Video motion detection
"seq" = Periodic condition
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi"= Virtual input (Manual trigger)
6/6 The status for event trigger
6/6 Indicate the source id of di trigger.
This field is required when trigger
condition is "di".
One bit represents one digital input.
The LSB indicates DI 0.
6/6 Indicate the source id of vi trigger.
This field is required when trigger
condition is "vi".
One bit represents one digital input.
The LSB indicates VI 0.
6/6 Indicate the source of the tampering
detection. Each bit represents one
channel, and the LSB indicates
channel 1.
VIVOTEK
User's Manual - 167