BIOS Password Jumper: JPASSWORD1
The jumper is used to clear the BIOS password. You can clear BIOS password
byshorting 2-3 pin while the system is off. Then return to 1-2 pin position. Avoid
clearing the password while the system is on; it will damage the mainboard.
JPASSWORD1
RAID Select Jumper: JRAID_SEL1
This jumper specifies the RAID solution.
JRAID_SEL1
1
1
Normal (default)
1
1
Normal (default)
MS-9298
MS-9298
1
Password clear
1
Software RAID
3-15