Bios Recovery Jumper: J_Recovery; Clear Bios Password Jumper: J_Password; Write Protection Jumper For Serverengines Flash Rom: J10 - MSI X2-106A3R User Manual

BIOS Recovery Jumper: J_RECOVERY

Users can short connect pin#2-3 to recover the system BIOS with a Recovery
Floppy. W hen the system is done with the job, the buzzer will beep to remind the user
to set the jumper to its normal state (pin#1-2 short connected).
J_RECOVERY
1

Clear BIOS Password Jumper: J_PASSWORD

The jumper is used to clear the BIOS password. You can clear BIOS password by
shorting 2-3 pin while the system is off. Then return to 1-2 pin position. Avoid clearing
the password while the system is on; it will damage the mainboard.
J_PASSWORD
1

Write Protection Jumper for ServerEngines Flash ROM: J10

This jumper is used to enable/disable the write protection function for the ServerEngines
Flash ROM. W hen you intend to access the ServerEngines Flash ROM, uncap this
jumper first. Under normal operation, we suggest that you enable the write protection
function by capping this jumper to protect the ServerEngines Flash ROM from virus
infection.
J10
1
Normal
1
Normal
Enable Write Protection
Hardware Setup
3 1 3
Recovery
3 1 3
Clear
Disable Write Protection
2-13