Table of Contents
Advertisement
Rack Mounting
Chassis Ears & Rails
1. The chassis rails and rack rails have been as-
sembled together beforehand. The first thing to do
with the rail set is to take the chassis rails off the
rack rails.
NOTE:
Only the service personnel are
allowed to handle the rail set.
2. Pull the chassis rail gently out until the locking tab locks the rail.
3. Simultaneously push open the locking tab and pull out the chassis rail. The chas-
sis rail should slide easily off the rack rail.
4. Follow the same procedures to disassemble the second chassis rail.
NOTE: The chassis rail is designed with a locking tab which can (1) hold
the system firmly to the rack, and (2) lock the system halfway without sliding
out of the rack rails.
Hardware Setup
2-27
Advertisement
Table of Contents
