NEC MultiSync LCD1700M+ Installation Manual page 5

Hardware Installation E - 3
2. Connect the power cord at the back of the monitor to an AC
power socket.
Please make sure, that the socket is not blocked or covered, so
you can disconnect the unit from AC supply if you need to. Your
monitor is equipped with an automatic power supply for a volt-
age range from 100 to 240 Volt at a frequency of 50 to 60 Hz.
Be sure that your local power is within the supported range. If
you are unsure, ask your electricity supplier.
Page 13 01/02/28, 17:40