NEC MultiSync LCD1700M+ Installation Manual page 13

Recommended Use
cord is not supplied with this monitor, please contact your sup-
plier.
Immediately unplug your monitor from the wall outlet and refer servic-
ing to qualified service personnel under the following conditions:
• When the power supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the moni-
tor.
• If the monitor has been exposed to rain or water.
• If the monitor has been dropped or the cabinet damaged.
• If the monitor does not operate normally by following operating
instructions.
• Do not bend power cord.
• Do not use monitor in high temperatured, humid, dusty, or oily
areas.
• Do not cover vent on monitor.
• If monitor or glass is broken, do not come in contact with the
liquid crystal and handle with care.
CAUTION
• Allow adequate ventilation around the monitor so that heat can
properly dissipate. Do not block ventilated openings or place
the monitor near a radiator or other heat sources.
Do not put anything on top of monitor.
• The power cable connector is the primary means of detaching
the system from the power supply. The monitor should be in-
stalled close to a power outlet which is easily accessible.
• Handle with care when transporting. Save packaging for trans-
porting.
Page 21
E - 11
01/02/28, 17:40