Recommended Use; Safety Precautions And Maintenance - NEC MultiSync LCD1700M+ Installation Manual

E - 10

Recommended Use

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOW-
ING WHEN SETTING UP AND USING THE MULTISYNC
LCD COLOUR MONITOR:
1700M+
• DO NOT OPEN THE MONITOR. There are no user service-
able parts inside and opening or removing covers may expose
you to dangerous shock hazards or other risks. Refer all servic-
ing to qualified service personnel.
• Do not spill any liquids into the cabinet or use your monitor
near water.
• Do not insert objects of any kind into the cabinet slots, as they
may touch dangerous voltage points, which can be harmful or
fatal or may cause electric shock, fire or equipment failure.
• Do not place any heavy objects on the power cord. Damage to
the cord may cause shock or fire.
• Do not place this product on a sloping or unstable cart, stand or
table, as the monitor may fall, causing serious damage to the
monitor.
• When operating the MultiSync LCD monitor with its AC 126-
240V power supply, use a power supply cord that matches the
power supply voltage of the AC power outlet being used. The
power supply cord you use must have been approved by and
comply with the safety standards of your country. (Type H05VV-
F should be used in UK)
• Do not place any objects onto the monitor and do not use the
monitor outdoors.
• The inside of the flourescent tube located within the LCD moni-
tor contains mercury.
Please follow the bylaws or rules of your municipality to dis-
pose of the tube properly.
• In UK, use a BS-approved power cord with molded plug having
a black (5A) fuse installed for use with this monitor. If a power
Page 20
Recommended Use
01/02/28, 17:40