Table of Contents
Advertisement
AirCard 800 Series Installation Guide
Note: Users of Windows 2000
must be logged in with adminis-
trative privileges. Users of
Windows XP may require admin-
istrative privileges.
Note: If you are running
Mac OS X, please refer to the
Watcher Quick Start Guide for
the Mac OS X 10.4.x found at
www.sierrawireless.com/mac
Note: Do not forcefully insert the
AirCard modem. This may
damage connector pins. If you
have more than one
PC Card/ExpressCard slot, you
may obtain better signal strength
using the top slot.
20
2. Installing the 3G Watcher software
Note: If you are running Windows 2000, Windows Installer Redistrib-
utable 2.0 must be installed. This is available on the Microsoft web
site, www.microsoft.com.
Note: You may require your Windows CD.
1.
If your package does not include an installation CD,
proceed to "4. TRU‐Install" on page 21.
Insert the installation CD into your CD‐ROM drive. The
2.
CD should AutoRun and display a menu.
If the CD does not AutoRun, select
d:\setup.exe
d
where
drive.
3.
From the CD start‐up menu, select your language, then
installation
, and then click the link under
to launch the installer.
Next
Back
4.
Use the
and
installer.
5.
To close the CD start‐up menu, click the
lower right corner of the window.
3. Inserting the AirCard modem
Without the ExpressCard to PC Card adapter
1.
With the label facing up, insert the AirCard modem into
your PC Card/ExpressCard slot.
Figure 2-5: Inserting the AirCard 875/88x modem
Start > Run
is the drive letter of your CD‐ROM
software installation
buttons to navigate through the
exit
and enter
option in the
2130893
Hide quick links:
Advertisement
Table of Contents
