Table of Contents
Advertisement
PHASER
By adding varied-phase portions to the direct sound, the
phaser effect gives a whooshing, swirling character to the
sound.
Parameter/
Explanation
Range
TYPE
Selects the number of stages that the phaser effect will use.
This is a four-phase effect. A light phaser
4 STAGE
effect is obtained.
This is an eight-phase effect. It is a popular
8 STAGE
phaser effect.
This is a twelve-phase effect. A deep phase
12 STAGE
effect is obtained.
This is the phaser with two phase shift cir-
BI-PHASE
cuits connected in series.
RATE
0–100
This sets the rate of the phaser effect.
DEPTH
0–100
Determines the depth of the phaser effect.
MANUAL
Adjusts the center frequency of the phaser
0–100
effect.
RESONANCE
Determines the amount of resonance (feed-
0–100
back). Increasing the value will emphasize
the effect, creating a more unusual sound.
STEP RATE
This sets the cycle of the step function that
changes the rate and depth.
OFF, 0–100
When it is set to a higher value, the change
will be finer. Set this to "OFF" when not us-
ing the Step function.
E.LEVEL (Effect Level)
0–100
Adjusts the volume of the phaser.
D.LEVEL (Direct Level)
0–100
Adjusts the volume of the direct sound.
FLANGER
The flanging effect gives a twisting, jet-airplane-like
character to the sound.
Parameter/
Explanation
Range
RATE
0–100
This sets the rate of the flanging effect.
DEPTH
0–100
Determines the depth of the flanging effect.
MANUAL
Adjusts the center frequency at which to
0–100
apply the effect.
RESONANCE
Determines the amount of resonance (feed-
back).
0–100
Increasing the value will emphasize the ef-
fect, creating a more unusual sound.
SEPARATION
Adjusts the diffusion. The diffusion in-
0–100
creases as the value increases.
E.LEVEL (Effect Level)
0–100
Adjusts the volume of the flanger.
D.LEVEL (Direct Level)
0–100
Adjusts the volume of the direct sound.
TREMOLO
Tremolo is an effect that creates a cyclic change in volume.
Parameter/
Explanation
Range
WAVE SHAPE
Adjusts changes in volume level.
0–100
A higher value will steepen wave's shape.
RATE
Adjusts the frequency (speed) of the
0–100
change.
DEPTH
0–100
Adjusts the depth of the effect.
Using Insert Effects
77
Advertisement
Table of Contents
