Boss BR-800 Owner's Manual page 108

Editing
4
Use the CURSOR buttons and the dial to select the
tracks and V-tracks that you want to exchange.
5
To exchange, press the [ENTER] button.
A message will ask "Are you sure?"
If you decide to cancel the procedure, press the [EXIT]
button.
6
Press the [ENTER] button.
The data will be exchanged.
* The display will indicate "Keep power on!" while the data is
being updated. Do not turn off the power while this message
is shown.
7
Press the [EXIT] button a number of times to return to
the play screen.
108
■ Importing song sketch data into a
track
1
Press the [TRACK] button.
2
Use the CURSOR [
to "TRACK EDIT," and press the [ENTER] button.
D_Track_Edit_Copy.eps
3
Use the CURSOR [
cursor to "SONG SKETCH IMPORT," and press the
[ENTER] button.
4
Use the CURSOR buttons and the dial to specify how
the data is to be imported.
D_Track_Inport.eps
Parameter Explanation
Select the units indicated by START.
DISP
Choose either TIME or MEASURE.
The song sketch data that will be im-
SOURCE
ported
The track into which the data will be
DEST
imported
The location at which the data will be
START inserted into the import-destination
track.
5
To import the data, press the [ENTER] button.
A message will ask "Are you sure?"
6
Press the [ENTER] button.
The data will be imported.
* While the data is being updated, the display will indicate
"Keep power on!" Do not turn off the power while this
message is shown.
7
Press the [EXIT] button a number of times to return to
the play screen.
] [ ] buttons to move the cursor
] [ ] buttons to move the