Table of Contents
Advertisement
Message
Cause
The operation you attempted cannot
Stop P.Trainer!
be executed while the Phrase Trainer
(p. 138) is operating.
The operation you attempted cannot
be executed while the recorder is op-
Stop recorder!
erating (i.e., during playback or re-
cording).
Writing to the BR-800's memory
System error!
failed.
You attempted to create more than
Too many files!
1,000 files in Song Sketch mode.
Too many
You attempted to create more than
songs!
100 songs.
Unformatted
The SD card is of a type that cannot
card!
be used on the BR-800.
Unsupported
An SD card not supported by the
BR-800 is inserted.
card!
An SD card of a format not usable by
the BR-800 is inserted.
Unsupported
format!
You attempted to import a WAV file
that the BR-800 does not support.
A larger amount of MIDI messages
USB buffer full!
than could be processed correctly
was received via USB.
Memory full!
The song size exceeded 1 GB.
Action
Turn the Time Stretch and Center Cancel function
"OFF."
Press the [STOP] button to stop playback or record-
ing.
It may be that the BR-800 has malfunctioned. Please
contact Roland customer service or your dealer.
Delete unneeded files.
Delete unneeded songs.
Turn off the power, firmly reinsert the SD card, and
then turn the power on again.
Format the card on the BR-800.
Use an SD card that is supported by the BR-800.
Format the card on the BR-800.
Check the format of the WAV file.
Reduce the amount of MIDI messages being sent to
the BR-800.
Erase unneeded tracks.
When you carry out the SAVE CURRENT STATE
procedure, the size of the song might be reduced.
Error Message List
Page
p. 138
–
–
p. 51
p. 109
–
p. 141
p. 148
p. 141
p. 124
–
p. 107
p. 111
159
Advertisement
Table of Contents
